The role of ear environment in postharvest susceptibility of maize to toxigenic Aspergillus flavus

A kernel screening assay (KSA) was used to assess the genetic and environmental effects on the vulnerability of maize to aflatoxin accumulation. Kernels of 26 inbred lines that had been grown in seven environments, and 190 lines of the Intermated B73xMo17 (IBM) population grown in one location in the United States, were inoculated with a toxigenic strain of A. flavus and incubated in the dark at 30°C for 6 days. Percent kernel colonization (PKC), sporulation and aflatoxin were influenced by the maize genotypes (G), the location (“ear environment” or E) and the GxE interactions. Overall, low broad‐sense heritabilities were observed for PKC, sporulation and aflatoxin. PKC was significantly correlated with sporulation in all environments. Aflatoxin was positively correlated with colonization for two and with sporulation for all ear environments. Higher grain sulphur or magnesium in IBM was associated with less colonization or aflatoxin. Postharvest susceptibility of maize to aflatoxin is thus influenced by factors that are modulated by the ear environment. In a KSA, sporulation could be a proxy test for aflatoxin accumulation.     

Development of colchicine‐induced tetraploid St. Augustinegrass (Stenotaphrum secundatum) lines

St. Augustinegrass is well suited for lawns and commercial landscapes. While many genotypes are cross‐fertile, all cultivars are propagated vegetatively in sod production. To ensure varietal purity, development of sterile triploid hybrids by crossing tetraploid and diploid genotypes has been successfully used in other warm‐season turfgrasses. Applying this model in St. Augustinegrass would be beneficial to sod producers and turf managers who require purity for certification and uniformity for performance, respectively. This study was conducted to develop colchicine‐induced tetraploid lines of St. Augustinegrass. Seeds of cultivar ‘Raleigh’ were treated with four colchicine concentrations at four exposure times. A non‐treated control was included among the treatments. Seedlings that germinated were screened for genome size changes using flow cytometry. Line DSA 13005 and two progeny lines derived through selfing, DSA 16001 and DSA 16016, were corroborated as tetraploids (2n = 4x = 36) through chromosome counts. These lines will be used in future breeding efforts to attempt development of sterile triploid cultivars of St. Augustinegrass.     

Conductive 3D structure nanofibrous scaffolds for spinal cord regeneration

The complex nature of spinal cord injuries has provided much inspiration for the design of novel biomaterials and scaffolds which are capable of stimulating neural tissue repair strategies. Recently, conductive polymers have gained much attention for improving the nerve regeneration. In our previous study, a three-dimensional (3D) structure with reliable performance was achieved for electrospun scaffolds. The main purpose in the current study is formation of electrical excitable 3D scaffolds by appending polyaniline (PANI) to biocompatible polymers. In this paper, an attempt was made to develop conductive nanofibrous scaffolds, which can simultaneously present both electrical and topographical cues to cells. By using a proper 3D structure, two kinds of conductive scaffolds are compared with a non-conductive scaffold. The 3D nanofibrous core-sheath scaffolds, which are conductive, were prepared with nanorough sheath and aligned core. Two different sheath polymers, including poly(lactic-co-glycolic acid) PLGA and PLGA/PANI, with identical PCL/PANI cores were fabricated. Nanofibers of PCL and PLGA blends with PANI have fiber diameters of 234±60.8 nm and 770±166.6 nm, and conductivity of 3.17×10^-5 S/cm and 4.29×10^-5 S/cm, respectively. The cell proliferation evaluation of nerve cells on these two conductive scaffolds and previous non-conductive scaffolds (PLGA) indicate that the first conductive scaffold (PCL/ PANI-PLGA) could be more effective for nerve tissue regeneration. Locomotor scores of grafted animals by developed scaffolds showed significant performance of non-conductive 3D scaffolds. Moreover, the animal studies indicated the ability of two new types of conductive scaffolds as spinal cord regeneration candidates.     

Effect of nitrogen root zone fertilization on rice yield,uptake and utilization of macronutrient in lower reaches of Yangtze River,China

Improper application of nitrogen (N) has led to high N losses and low N use efficiency in the lower reaches of Yangtze River in China. An effective method to solve such problems is the deep fertilized N in root zone (RZF). Limited information is available on the effect of RZF on the uptake of macronutrients (N, P and K) and rice yield. Field experiments, conducted from 2014 to 2015, compared the farmer fertilizer practice (FFP, with 225 kg ha^?1 of N, split into three doses) and RZF using the same rate but placing N 5 cm away from rice roots in holes 10 cm deep (RZF10) or 5 cm deep (RZF5) as a single application. The highest mean yield (10.0 t ha^?1) was obtained in RZF10, which was 19.5% more than that in FFP. Root zone fertilization of urea (whether 10 cm deep or 5 cm deep) resulted in greater accumulation of N, P and K in stem, leaf sheaths, leaf blades and grains compared to that in FFP in sandy and in loam soils. The uptake of N, P and K was the highest in RZF10 (average at 176.7, 66.2 and 179.1 kg ha^?1, respectively), higher than that in FFP by 45.0, 17.0 and 22.6%, respectively. N apparent recovery efficiency was markedly higher in RZF10 (53.1%) than in FFP (27.5%). RZF10 significantly increased the N, P, K uptake compared with FFP under different N rates in both sandy and loam soils. These results suggest that the N, P and K input amount should be re-determined under RZF.     

Embodied Resources in Fish and Shrimp Feeds

Global averages were obtained for amounts of energy, land, water, wildfish, nitrogen, and phosphorus embodied in aquaculture feed ingredients. These data allowed amounts of these embodied resources to be calculated for typical feed formulations for channel catfish, Ictalurus punctatus; hybrid catfish, I. punctatus♀ × I. furcatus♂; Vietnamese catfish, Pangasius spp.; Atlantic salmon, Salmo salar; rainbow trout, Oncorhynchus mykiss; tilapia, Oreochromis spp.; whiteleg shrimp, Litopenaeus vannamei; and black tiger shrimp, Penaeus monodon. Embodied resource use per m.t. of feed varied among species: energy, 4.90–12.48 GJ/m.t.; land, 0.082–0.312 ha/m.t.; water, 502–1227 m³/m.t.; wildfish, 0–2880 kg/m.t.; nitrogen, 3.08–8.63 kg/m.t.; phosphorus, 1.16–5.62 kg/m.t. These calculations did not account for variations in site‐specific factors related to embodied resources and feed composition and use. But they suggest that reducing feed conversion ratio (FCR) by 0.1 unit for the seven species (species groups) could potentially reduce feed use by around 1.1 million tonne (Mt) while conserving 9.8 million GJ of energy, 270,000 ha of agricultural land, 1.4 billion m³ of freshwater, and 1.24 Mt of wildfish. Reduction of the FCR is a powerful means of lessening farm‐level production costs and negative impacts of feed production and use.     

Evaluation of mechanical properties of jute/glass/carbon fibers reinforced hybrid composites

A study on the tensile and flexural properties of jute-glass-carbon fibers reinforced epoxy hybrid composites in inter-ply configuration is presented in this paper. Test specimens were manufactured by hand lay-up process and their tensile and flexural properties were obtained. The effects of the hybridization, different fibers content and plies stacking sequence on the mechanical properties of the tested hybrid composites were investigated. Two-parameter Weibull distribution function was used to statistically analyze the experimental results. The failure probability graphs for the tested composites were drawn. These graphs are important tools for helping the designers to understand and choose the suitable material for the required design and development. Results showed that the hybridization process can potentially improve the tensile and flexural properties of jute reinforced composite. The flexural strength decreases when partial laminas from a carbon/epoxy laminate are replaced by glass/epoxy or jute/epoxy laminas. Also, it is realized that incorporating high strength fibers to the outer layers of the composite leads to higher flexural resistance, whilst the order of the layers doesn’t affect the tensile properties.     

A genetic linkage map in southern‐by‐spring oat identifies multiple quantitative trait loci for adaptation and rust resistance

We developed 178 recombinant inbred lines from a southern‐by‐spring oat population designated as “TxH.” These lines were genotyped to generate a high‐quality linkage map that resolved 6,902 markers into 21 linkage groups that matched closely with the latest hexaploid oat consensus map. Three major quantitative trait loci (QTLs) affecting heading date were found in locations that are consistent with known QTLs and candidate genes, and two other QTLs affecting heading date were found in novel locations. Five QTLs affecting plant height were found. Both sets of QTLs are responsible for transgressive segregation observed for these two traits. Four QTLs affecting resistance to crown rust, caused by the pathogen Puccinia coronata f. sp. avenae, were identified. Two of these QTLs are consistent with known clusters of rust resistance genes, while two may represent new locations of novel rust resistance genes. A complete set of SNP sequences suitable for generating markers for molecular selection is provided.